• 2022-02-08

The three most important steps in a stamping factory are shearing, punching / cutting and folding. Stamping parts are sometimes used as metal pulling. The word comes from English platemetal. Generally, some metal sheets are pressed by hand or die to produce plastic deformation to form the desired shape and size, and more complex parts can be formed by welding or a small amount of mechanical proces...

• 2022-04-15

Usually, sheet metal is the material for the plate type, which is generally made into the specified shape and operated by the plate shearing machine or bending machine, while the machining is more complex. The material is massive, not simply bent and deformed, but cut, etc. the equipment generally uses lathes, grinding machines, etc

• 2022-06-17

At present, with the rapid development of science and technology, the market demands more and more metal stamping workpieces. In order to produce good stamping workpieces, plates generally need heat treatment after stamping. Appropriate heat treatment can significantly improve the mechanical properties of workpieces and prolong the service life of five metal stamping workpieces

• 2022-08-19

During the stamping production, the punch drives the die to move back and forth, which determines that the processing accuracy of the stamping products is mainly affected by the following three aspects, namely, the size and accuracy of the die, the accuracy of the die fitting, and the accuracy of the punch. 1. Influence of die size and precision on the precision of stamping products Stamping produ...