• 2026-05-30

What Is Salt Spray Test? The salt spray test is an accelerated corrosion test to evaluate the anti-rust and corrosion resistance of metal stamping components, surface coatings and electroplating finishes. It is widely required by overseas buyers for automotive parts, home appliance hardware, electronic terminals and outdoor industrial accessories.   Main Test Standards Our factory follows int...

• 2026-06-01

Minimum Thickness: 0.01mm for Ultra-Thin Foils In industrial practice, the minimum practical thickness is 0.01mm (10μm) for soft, ductile materials like copper, aluminium, or stainless steel foil, using ultra-precision dies and high-speed presses.   Standard precision stamping: 0.1mm–3.0mm (85% of applications fall between 0.3mm–1.2mm).   Ultra-thin specialty stamping: 0.0...

• 2026-06-03

Grain-Oriented vs Non-Oriented Silicon Steel: Which for EV Motors? Most buyers confuse grain-oriented and non-oriented silicon steel for EV motor production. Here is the clear distinction:   Grain-Oriented Silicon Steel (CRGO): Designed only for single-direction magnetic flux transformers. Not applicable for EV stators and rotors.   Non-Oriented Silicon Steel (NOES): Features uniform mul...

• 2026-06-10

  Core Principle: Excessive Contact Resistance Terminal overheating is fundamentally caused by abnormally high contact resistance. According to Joule’s law, high resistance generates massive heat when current passes through. Once the terminal contact surface fails to fit tightly, resistance rises sharply, forming a vicious cycle: heat accumulation → increased resistance → more...

• 2026-06-17

  What is SPCC I/O Backplate? SPCC is a low-carbon cold rolled steel widely used for mass-market computer I/O shields. It offers excellent stamping performance, low material cost and good low-frequency magnetic shielding ability. SPCC is soft and easy to bend, which helps produce precise grounding spring tabs and clean port cut outs for mass production.   The main disadvantage of SPCC is...

• 2026-06-22

Why Terminal Precision Matters for Motors Even tiny flaws in terminals create big problems:   Energy loss: Poor fit increases contact resistance, raising heat and lowering efficiency.   Connection failure: Vibration or thermal cycling causes loose contacts, leading to motor shutdowns.   Safety risks: Overheating from unstable connections can trigger short circuits.   Micro prec...

• 2026-06-23

Precision plays a vital role in hardware stamping parts. You depend on precise manufacturing to ensure high product quality, safety, and reliability. The table below shows how precision shapes these aspects in industrial and medical fields:   Aspect Impact on Product Quality Impact on Safety Impact on Reliability Precision in Stamping Ensures components meet strict quality standards Critical ...

• 2026-06-29

What Exactly Are Automotive Wire Terminals? Automotive wire terminals are precision stamped metal contacts fixed on wire ends. They build detachable, firm and anti-vibration electrical connections between wires, sensors, ECU modules, batteries and auto accessories.   Different from ordinary electronic connectors, auto wire terminal connectors can resist high temperature, strong vibration, wat...

• 2026-07-03

Why Copper Rod Bars Are Essential for ESS Superior Electrical Conductivity: With up to 58 MS/m conductivity, copper minimizes resistance and power loss, improving overall system efficiency.   Excellent Thermal Performance: Rapid heat dissipation reduces hotspot risks and extends battery life.   Mechanical Strength & Ductility: Easily formed into custom shapes while withstanding vibra...

• 2026-07-04

What Are Copper Busbars for New Energy Applications? Copper busbars are high-conductivity conductive parts used for high current transmission, widely applied in EV battery packs, motor controllers and energy storage cabinets. Made of high-purity copper with customized shapes and insulating treatment, they fully meet strict working standards of new energy equipment.   Main application scenario...