• 2021-09-14

The rapid development of science and technology brings about the improvement of production level. With the rapid development of industry, advanced metal stamping technology has been widely used in our country. Now let's talk about what metal stamping is and its advantages: 1、 What is metal stamping Metal stamping is a processing method of cutting and forming metal plate or coil by using punch and ...

• 2021-11-27

Material selection of stamping parts: The three most important steps in a stamping factory are shearing, punching / cutting and folding. Stamping parts are sometimes used as metal pulling. The word comes from English platemetal. Generally, some metal sheets are pressed by hand or die to produce plastic deformation to form the desired shape and size, and more complex parts can be formed by welding ...

• 2021-12-18

At present, the commonly used materials of metal stamping parts are: 1) SECC: galvanized iron sheet 2) Spec: tinned cold rolled sheet 3) Sus: stainless steel series 4) Al: aluminum series 5) Cu: copper series 6) PBR: white copper 7) Spte: Tinplate 8) Al set: lamp cover 9) Al Arg: lamp cover

• 2021-12-30

Stamping process and its characteristics stamping is a pressure processing method that uses the die installed on the press to exert pressure on the material at room temperature to produce separation or plastic deformation, so as to obtain the required parts. Stamping is usually cold deformation processing of materials at room temperature, and mainly uses sheet metal to process the required parts, ...

• 2022-02-23

The quality standards of stamping parts are divided into national standard and non-standard. The following are different concepts about national standard and non-standard: National standard: refers to the standard approved and issued by the national standardization authority, which is of great significance to the national economic and Technological Development and is unified throughout the country...

• 2022-03-26

The design of metal stamping parts shall comply with the following rules: 1.The design of metal stamping parts must be simple in appearance and fair in structure, so as to simplify the die structure and the number of processes simplified by Guangdong metal stamping plant and Guangdong steel pipe plant, that is, complete the processing of the whole parts with the least and simplest stamping process...

• 2022-04-15

Usually, sheet metal is the material for the plate type, which is generally made into the specified shape and operated by the plate shearing machine or bending machine, while the machining is more complex. The material is massive, not simply bent and deformed, but cut, etc. the equipment generally uses lathes, grinding machines, etc

• 2022-06-17

At present, with the rapid development of science and technology, the market demands more and more metal stamping workpieces. In order to produce good stamping workpieces, plates generally need heat treatment after stamping. Appropriate heat treatment can significantly improve the mechanical properties of workpieces and prolong the service life of five metal stamping workpieces

• 2022-07-01

1. Auto parts: mainly including all kinds of auto structural parts, auto relays, new energy power battery accessories, etc. 2. Electronic parts: generally including connector parts, connectors, terminals, shrapnel parts, etc. 3. Household appliance parts: usually contain precision hardware parts of various household appliances, such as color tube, electron gun parts and household appliance parts. ...

• 2022-07-08

People in the metal stamping industry know that the surface stains of metal stamping parts come from the lubricating oil on the mold, and the mold must be lubricated at the beginning of processing. In this way, the workpiece will inevitably be stained with stains, so the surface stains need to be cleaned before the metal stamping parts are shipped. The principle of removing stains is: saponificati...

• 2025-06-20

In today's fast-paced manufacturing industry, precision stamping has become an essential process for producing high-quality components for various sectors, including automotive, electronics, and consumer goods. At Jiaxin company, we understand the significance of precision stamping and have dedicated ourselves to providing top-notch OEM and ODM services to our global clients. The Power of Precisio...

• 2025-07-31

Tiny Metal Parts, Huge Difference — The Magic of Precision Stamping In almost every smart phone, car and kitchen tool you use, there are tiny metal parts made by precision stamping. At Jiaxin company, we turn thin sheets of steel, copper and aluminum into these small but powerful parts, giving global clients the OEM and ODM support they need. What is precision stamping of metal parts? It is a way ...