• 2021-11-27

Material selection of stamping parts: The three most important steps in a stamping factory are shearing, punching / cutting and folding. Stamping parts are sometimes used as metal pulling. The word comes from English platemetal. Generally, some metal sheets are pressed by hand or die to produce plastic deformation to form the desired shape and size, and more complex parts can be formed by welding ...

• 2021-12-18

At present, the commonly used materials of metal stamping parts are: 1) SECC: galvanized iron sheet 2) Spec: tinned cold rolled sheet 3) Sus: stainless steel series 4) Al: aluminum series 5) Cu: copper series 6) PBR: white copper 7) Spte: Tinplate 8) Al set: lamp cover 9) Al Arg: lamp cover

• 2022-02-08

The three most important steps in a stamping factory are shearing, punching / cutting and folding. Stamping parts are sometimes used as metal pulling. The word comes from English platemetal. Generally, some metal sheets are pressed by hand or die to produce plastic deformation to form the desired shape and size, and more complex parts can be formed by welding or a small amount of mechanical proces...

• 2025-12-29

You want your displays to last long and look nice with little work. Galvanized steel display accessories are very strong and do not get damaged easily. These accessories are special because they do not rust or wear out as fast as others. You save time and money when you pick something that stays strong and looks good. Cost Benefits of Galvanized Steel Display Affordable Initial Investment You want...

• 2026-04-20

Durable Black Metal Sink Organizer: Combining Industrial Strength with Sleek Design Established in 1998, JX (Xiamen) Precision Metal has spent decades perfecting the art of hardware stamping and precision manufacturing. Our Heavy-Duty Metal Sink Organizer is a testament to this expertise, designed to withstand the daily demands of a busy household while maintaining its structural integrity and sle...

• 2026-05-12

You use 304 stainless steel stamped parts when you need components that resist corrosion and maintain strength. Stainless steel grade 304 offers excellent durability for demanding environments. Manufacturers shape these parts through precision stamping. You find them in automotive, kitchen, and industrial products for reliable performance. 304 Stainless Steel Stamped Parts What Is 304 Stainless St...

• 2026-06-02

Motor cores including stator and rotor laminations are critical components that determine motor efficiency, stability and service life. Manufacturers classify them into new energy motor cores and traditional motor cores. Though both stator and rotor parts are made of laminated silicon steel via stamping, they differ greatly in materials, precision standards and applicable working conditions.  ...

• 2026-06-03

Grain-Oriented vs Non-Oriented Silicon Steel: Which for EV Motors? Most buyers confuse grain-oriented and non-oriented silicon steel for EV motor production. Here is the clear distinction:   Grain-Oriented Silicon Steel (CRGO): Designed only for single-direction magnetic flux transformers. Not applicable for EV stators and rotors.   Non-Oriented Silicon Steel (NOES): Features uniform mul...

• 2026-06-17

  What is SPCC I/O Backplate? SPCC is a low-carbon cold rolled steel widely used for mass-market computer I/O shields. It offers excellent stamping performance, low material cost and good low-frequency magnetic shielding ability. SPCC is soft and easy to bend, which helps produce precise grounding spring tabs and clean port cut outs for mass production.   The main disadvantage of SPCC is...

• 2026-06-30

1. Core Manufacturing Process: 45-Ton Progressive Die Stamping Cold rolled steel precision terminals are primarily formed using 45-ton high-speed punch presses​ with progressive dies. This process offers distinct advantages:   Ultreme Precision:​ Ensures dimensional consistency and smooth, burr-free edges (as highlighted by "smooth burn-free edges"), preventing poor contact caused by assembly...

• 2026-07-29

Clutter can quickly turn high-traffic areas like kitchens and bathrooms into overwhelming spaces. If you're tired of flimsy plastic caddies, cluttered countertops, or standard Stainless Steel Kitchen Sink Organizers that lack industrial-grade load capacity, it is time for a serious upgrade. Investing in a heavy-duty metal storage solution brings long-lasting structure, superior strength, and moder...