• 2026-07-14

The Real Challenge: Flatness and Springback From a tooling perspective, the hardest part isn't the cut; it's the flatness. We’re typically chasing a tolerance of ±0.05mm to ±0.1mm​ across the entire plane.     Steel has memory. When you bend those little legs or add stiffening ribs, the material wants to spring back. If your die design doesn't compensate for this, or ...

• 2026-07-15

You start by defining your project needs—part specifications, quantity, material, and deadlines. Clear communication with your provider minimizes errors and delays. Requesting online quotes streamlines the process. Choosing an experienced company like Jiaxin for custom metal stamping ensures reliable results. High upfront tooling costs Longer pre-production times Costly design changes Higher...

• 2026-07-16

  Why Metal Instead of Plastic? Most stock brackets are plastic. They’re cheap to mold, light to ship, and “good enough” for low loads. But once you bolt on a heavy dual-tower air cooler or a thick radiator, physics takes over. Plastic creeps under sustained pressure. It gets brittle with heat cycles. And when it fails, it usually takes your motherboard with it.    ...